NOTE:PocketBeagles with headers are out of stock. Check the PocketBeagle page for inventory updates as they become available.
What is it?
The K40D-PB is a cape for the PocketBeagle designed to drive ws2811 LED pixels. It has 10 RJ45 differential ports that can output 40 strings of pixel data. It also has a single UART based differential output for driving DMX, Renard, LOR, PixelNet, etc….
The K40D-PB also provides a Real Time Clock, temperature sensors, a header for an OLED display, and four push buttons for navigating menus on the display.
Why did you make it?
Animated Christmas Light displays typically use ws2811 Pixels for things like house outlines, candy canes, tree’s, etc… The K40D-PB was designed to drive a large number of pixels, yet remain relatively small so it can be easily hidden or mounted onto the prop.
What makes it special?
The 10 RJ45 ports provide the ability to drive a ws2811 pixel differential receiver board (available from pixelcontroller.com ).
The K40D-PB must be powered by an external 5V power supply through the screw terminals on the board.
Technical details: The ws2811 protocol is extremely timing dependent and are generally not drivable via a general purpose Linux CPU. The FPP software uses the two semi real-time PRU’s available on the PocketBeagle to handle the protocol specific timings. Using the PRU’s also allows the main CPU to be free for other things such as network IO.
You WILL need:
- ws2811 pixels
- Differential receiver boards
- A good quality SD card with the latest FPP image installed on it. The latest FPP image can always be found at https://github.com/FalconChristmas/fpp/releases/
- A USB network adapter – ethernet is preferred for initial setup, but WIFI (adapter must be supported by Linux/Beaglebone/Raspberry Pi) can also work if you use a micro-usb cable to connect to the PocketBeagle to do the WIFI setup.